oil cooler tower seals new style late/ late = shoulders same size (10mm) Silicone Elring Empi
Part number:
98-9205-B
Your cost:
$0.65
Description:
Two shown, but these are sold each
Doghouse oil cooler tower seal for the new style coolers.
Late/ late fit. That means the shoulders are the same size on both sides (10mm).
Fits the cooler adapter* at the cooler and at the block on all late model blocks.
Sold each here.
Buy 2 if you have a doghouse oil cooler.
Also known as part# 021 117 151AS
*this can be the cooler adapter for remote coolers or the stock cooler adapter for the doghouse style cooling tower.
I show them here as you'd test fit them to the holes on top of your block and again with a light coat of sealant on them (both sides) just before installing your oil cooler adapter.
Doghouse oil cooler tower seal for the new style coolers.
Late/ late fit. That means the shoulders are the same size on both sides (10mm).
Fits the cooler adapter* at the cooler and at the block on all late model blocks.
Sold each here.
Buy 2 if you have a doghouse oil cooler.
Also known as part# 021 117 151AS
*this can be the cooler adapter for remote coolers or the stock cooler adapter for the doghouse style cooling tower.
I show them here as you'd test fit them to the holes on top of your block and again with a light coat of sealant on them (both sides) just before installing your oil cooler adapter.
Availability:
Ships within 1-3 business days
We accept the following forms of payment: