carb kit dual 40 standard kit for type 2/4 & 914 Empi Gen 3 HPMX
Part number:
47-7347
Your cost:
$850.00
Description:
http://www.youtube.com/user/EMPIHPMX
This is a dual carb kit with chrome air cleaners, standard (ball burnished) manifolds and hexbar linkage. Ready to bolt on with fuel line, hardware and detailed instructions.
Carbs made for Empi in China.
This kit fits 1700-2000cc type 2, type 4 & 914 engines.
1. Comes with chrome steel velocity stacks.
2. Dual linkage arms are already on carbs, no swapping needed.
3. Profiled throttle shafts for increased flow past the butterflies.
4. 40's come with .52 idle jets, .115 mains, .200 airs, F-11 emulsions, 28mm Venturis, .550 ex pump jets, & .50 accel pump jets.
The 40's have the same style Auxiliary Venturi as the 44's
*All Size venturis Available
5. All parts are interchangeable with IDF's - jets, venturis, emulsion tubes, etc.
6. Flow bench tested with increased CFM over other models.
7. Dyno tested resulted in increased horse power.
8. Casting quality is excellent.
9. Comes with choke block off plates installed.
10. The 44 HPMX kit is part# 47-7295.
11. Manifold base flanges are dual bolt pattern drilled.
Any carburetor, new or used, alone or in kit form, installed or not, sold on this site is sold without warranty, and is not returnable
This is a dual carb kit with chrome air cleaners, standard (ball burnished) manifolds and hexbar linkage. Ready to bolt on with fuel line, hardware and detailed instructions.
Carbs made for Empi in China.
This kit fits 1700-2000cc type 2, type 4 & 914 engines.
1. Comes with chrome steel velocity stacks.
2. Dual linkage arms are already on carbs, no swapping needed.
3. Profiled throttle shafts for increased flow past the butterflies.
4. 40's come with .52 idle jets, .115 mains, .200 airs, F-11 emulsions, 28mm Venturis, .550 ex pump jets, & .50 accel pump jets.
The 40's have the same style Auxiliary Venturi as the 44's
*All Size venturis Available
5. All parts are interchangeable with IDF's - jets, venturis, emulsion tubes, etc.
6. Flow bench tested with increased CFM over other models.
7. Dyno tested resulted in increased horse power.
8. Casting quality is excellent.
9. Comes with choke block off plates installed.
10. The 44 HPMX kit is part# 47-7295.
11. Manifold base flanges are dual bolt pattern drilled.
Any carburetor, new or used, alone or in kit form, installed or not, sold on this site is sold without warranty, and is not returnable
Availability:
Ships within 1-3 business days
We accept the following forms of payment:
