carb kit dual 44 standard kit for type 4 & 914 - Empi Gen 3 HPMX
Part number:
47-7295
Your cost:
$850.00
Description:
http://www.youtube.com/user/EMPIHPMX
This is a dual carb kit with chrome air cleaners, standard (ball burnished) manifolds and hexbar linkage. Ready to bolt on with fuel line, hardware and detailed instructions.
Carbs made for Empi in China.
1. Comes with chrome steel velocity stacks.
2. Dual linkage arms are already on carbs, no swapping needed.
3. Profiled throttle shafts for increased flow past the butterflies.
4. 44's come with .55 idle jets, .135 mains, .200 airs, F-11 emulsions, 36mm Venturis, .550 ex pump jets, & .50 accel pump jets.
*All Size venturis Available
5. All parts are interchangeable with IDF's - jets, venturis, emulsion tubes, etc.
6. Flow bench tested with increased CFM over other models.
7. Dyno tested resulted in increased horse power.
8. Casting quality is excellent.
9. 40 HPMX Kit p/n is: 47-7347
10. Comes with choke block off plates installed.
11. Manifold base flanges are dual bolt pattern drilled
May I suggest a performance coil and 8mm wires to ignite all that fuel? A Compu-Fire big kit is even better.
Any carburetor, new or used, alone or in kit form, installed or not, sold on this site is sold without warranty, and is not returnable
This is a dual carb kit with chrome air cleaners, standard (ball burnished) manifolds and hexbar linkage. Ready to bolt on with fuel line, hardware and detailed instructions.
Carbs made for Empi in China.
1. Comes with chrome steel velocity stacks.
2. Dual linkage arms are already on carbs, no swapping needed.
3. Profiled throttle shafts for increased flow past the butterflies.
4. 44's come with .55 idle jets, .135 mains, .200 airs, F-11 emulsions, 36mm Venturis, .550 ex pump jets, & .50 accel pump jets.
*All Size venturis Available
5. All parts are interchangeable with IDF's - jets, venturis, emulsion tubes, etc.
6. Flow bench tested with increased CFM over other models.
7. Dyno tested resulted in increased horse power.
8. Casting quality is excellent.
9. 40 HPMX Kit p/n is: 47-7347
10. Comes with choke block off plates installed.
11. Manifold base flanges are dual bolt pattern drilled
May I suggest a performance coil and 8mm wires to ignite all that fuel? A Compu-Fire big kit is even better.
Any carburetor, new or used, alone or in kit form, installed or not, sold on this site is sold without warranty, and is not returnable
Availability:
Ships within 4-7 business days
We accept the following forms of payment:
