wheel stud 14mm press in style set of 5 - 1.855" long - Drum Empi
Part number:
70-2850
Your cost:
$11.00
Description:
Black Competition studs are chamfered (on the flat end) for brake shoe clearance & feature a starting shoulder for easy nut alignment.
Requires drilling your brake drum for press fit installation*.
Empi lists this as a disc install stud.
Thread pitch is 1.5.
Empi packaged.
Overall length is 1 3/4" from flat edge to end of rim starter area.
Splined area is 12mm long, threaded area is 24mm long, starting shoulder is 10mm long.
The splined areas OD is 15mm
The flat head is 19mm wide x 3mm thick
*Use a 9/16" drill bit to drill your holes
Use a deep socket on the outside of the drum to carry the 'press load' or the drum will break
Requires drilling your brake drum for press fit installation*.
Empi lists this as a disc install stud.
Thread pitch is 1.5.
Empi packaged.
Overall length is 1 3/4" from flat edge to end of rim starter area.
Splined area is 12mm long, threaded area is 24mm long, starting shoulder is 10mm long.
The splined areas OD is 15mm
The flat head is 19mm wide x 3mm thick
*Use a 9/16" drill bit to drill your holes
Use a deep socket on the outside of the drum to carry the 'press load' or the drum will break
Availability:
Ships within 4-7 business days
We accept the following forms of payment:
