Compu-Fire DIS-IX kit with Red wire set
Part number:
11100R
Your cost:
$360.00
Description:
Shown installed (with the old style coil) on a customers 2332.
CompuFire DIS-IX kit w/ custom made Red wire set for 009 distributors, Opel's and Pinto's with Bosch distributors.
This is the complete big kit - 60,000+ volt. Comes with the coil*, coil mount, high performance Taylor Spiro Pro 8mm Red wires (short ones are 18 3/4" & the long ones are 28"), standard blue cap (we painted the one shown installed here red), rotor and instructions.
Other than mounting the coil with the bracket included, this kit is a snap to install. We show it here mounted on the back of a chrome shroud. We have ALSO mounted this in about the same spot on oem doghouse shrouds.
Many ask if this can be used on this engine or that engine. The answer is yes, for the VW air cooled engine.
Manufactured & warranted by Pertronix, in the USA.
This product is intended to be used only on racing vehicles on closed courses and not for use on roads or vehicles otherwise subject to emissions control requirements. In California, this product should not be used on any vehicle that is registered or licensed for use on public roads. If you ignore these recommendations, you do so at you own full risk.
Do not turn your engine over by hand with the key on, as this fires at ZERO RPM. Also sold as part# 11100 but we add an R here for Red wires.
Special note: according to a customer of ours, this kit can work on the 050 distributor, with mods to the distributor.
If you are going to be using a tachometer, get the tach adapter wire now, so it doesn't cost you any shipping to get it later.
*The coil has been changed in appearance & in performance. The new coil shown here in a close up pic by itself, is designed to be better than before.
CompuFire DIS-IX kit w/ custom made Red wire set for 009 distributors, Opel's and Pinto's with Bosch distributors.
This is the complete big kit - 60,000+ volt. Comes with the coil*, coil mount, high performance Taylor Spiro Pro 8mm Red wires (short ones are 18 3/4" & the long ones are 28"), standard blue cap (we painted the one shown installed here red), rotor and instructions.
Other than mounting the coil with the bracket included, this kit is a snap to install. We show it here mounted on the back of a chrome shroud. We have ALSO mounted this in about the same spot on oem doghouse shrouds.
Many ask if this can be used on this engine or that engine. The answer is yes, for the VW air cooled engine.
Manufactured & warranted by Pertronix, in the USA.
This product is intended to be used only on racing vehicles on closed courses and not for use on roads or vehicles otherwise subject to emissions control requirements. In California, this product should not be used on any vehicle that is registered or licensed for use on public roads. If you ignore these recommendations, you do so at you own full risk.
Do not turn your engine over by hand with the key on, as this fires at ZERO RPM. Also sold as part# 11100 but we add an R here for Red wires.
Special note: according to a customer of ours, this kit can work on the 050 distributor, with mods to the distributor.
If you are going to be using a tachometer, get the tach adapter wire now, so it doesn't cost you any shipping to get it later.
*The coil has been changed in appearance & in performance. The new coil shown here in a close up pic by itself, is designed to be better than before.
Availability:
Out of stock
We accept the following forms of payment:
