1641cc long block - new build - sold
Part number:
1641budget
Description:
A buildable core is required, inquire.
This started with an AH block.
We sent it out and had it align bored, oil gallies drilled and tapped & thoroughly cleaned.
We had the crank ground and the rods rebuilt.
We installed a new 100 cam kit with drilled lobe lifters and an AE block oil pump (21mm gears).
From there we added a new AA brand 1641cc p/cyl kit and a pair of rebuilt stock cylinder heads with 3 angle grind stock valves, 49cc combustion chambers & 14mm x 1/2 spark plug bores.
A perfect set of cleaned & spin polished used stock pushrods ride inside new pushrod tubes & seals.
Those will push used rocker assemblies that have been taken apart, thoroughly cleaned & shafts polished & lubed before reassembly.
Stock valve adjust screws & nuts
Stock steel valve covers & bales w/ new gaskets
Built with 8:1 compression ratio for 87 octane gas & long life
Tax is charged for Nevada pick up or Nevada purchase
$300 additional if no core is available
This started with an AH block.
We sent it out and had it align bored, oil gallies drilled and tapped & thoroughly cleaned.
We had the crank ground and the rods rebuilt.
We installed a new 100 cam kit with drilled lobe lifters and an AE block oil pump (21mm gears).
From there we added a new AA brand 1641cc p/cyl kit and a pair of rebuilt stock cylinder heads with 3 angle grind stock valves, 49cc combustion chambers & 14mm x 1/2 spark plug bores.
A perfect set of cleaned & spin polished used stock pushrods ride inside new pushrod tubes & seals.
Those will push used rocker assemblies that have been taken apart, thoroughly cleaned & shafts polished & lubed before reassembly.
Stock valve adjust screws & nuts
Stock steel valve covers & bales w/ new gaskets
Built with 8:1 compression ratio for 87 octane gas & long life
Tax is charged for Nevada pick up or Nevada purchase
$300 additional if no core is available
We accept the following forms of payment:
