throttle lever activator for hooking up throttle cable to Weber 7/16"
Part number:
444.311.08DH
Your cost:
$30.00
Description:
throttle lever activator for hooking up throttle cable to 7/16" (flat to flat) hex shaft crossbar linkage.
One sold here, shown on the left* in the loose picture. Large size lever is shown installed.
DOES NOT INCLUDE cinch bolt shown.
This is the bar (about 3" long) that hangs off of the cross bar (points at the fuel pump) that the throttle cable connects to (with a barrel nut, NOT included).
In the installed pic, you can see where I clearance off the edges of the hexbar to allow adjustment of the lever without having to remove it from the shaft assembly.
*For the larger shaft (9/16") see part 43-1018-3
One sold here, shown on the left* in the loose picture. Large size lever is shown installed.
DOES NOT INCLUDE cinch bolt shown.
This is the bar (about 3" long) that hangs off of the cross bar (points at the fuel pump) that the throttle cable connects to (with a barrel nut, NOT included).
In the installed pic, you can see where I clearance off the edges of the hexbar to allow adjustment of the lever without having to remove it from the shaft assembly.
*For the larger shaft (9/16") see part 43-1018-3
Availability:
In Stock
We accept the following forms of payment:
