hose fitting 30 degree 3/8" thread 1/2" barb - pair Empi
Part number:
17-2876
Your cost:
$9.55
Description:
30 degree bend.
Sold as a pair.
Empi packaged
These install with a 12mm wrench
use a 3/8-18 npt tool to tap (and a 37/64 drill bit) for the pilot hole
Another use for this fitting is shown on a sandrail's oil filler (drilled & taped at an angle), where the common straight fitting would've caused us to use another 6" of breather line.
We also used it to create a hidden hose situation to enable a super clean shot to a breather on the back side of a shroud via a stainless steel tube that passes through it.
Sold as a pair.
Empi packaged
These install with a 12mm wrench
use a 3/8-18 npt tool to tap (and a 37/64 drill bit) for the pilot hole
Another use for this fitting is shown on a sandrail's oil filler (drilled & taped at an angle), where the common straight fitting would've caused us to use another 6" of breather line.
We also used it to create a hidden hose situation to enable a super clean shot to a breather on the back side of a shroud via a stainless steel tube that passes through it.
Availability:
In Stock
We accept the following forms of payment:
