1776 all new for a bus in a hilly area 11-6-14
Part number:
1776jim's
Your cost:
$2,400.00
Description:
todays price will be more $.
This starts with an aluminum pentroof block that is shuffle pinned. We drop in a cw forged crank from Empi that is 8 doweled. We bolt on a chromoly 8 flywheel and attach it with a chromoly gland nut washer kit.
We use an Empi 110 cam kit with helical gears and drilled lobe lifters.
An Empi iron hi volume oil pump goes on with stock relief springs and performance plunger at the pulley end.
A chrome drain plate goes on with a new screen and chrome drain plug.
New stock design connecting rods hang on the crank.
All the bearings are steel backed.
A silicone flywheel seal closes up the back.
All new crank hardware and gears
8mm case savers prepare for the 8mm head studs
This starts with an aluminum pentroof block that is shuffle pinned. We drop in a cw forged crank from Empi that is 8 doweled. We bolt on a chromoly 8 flywheel and attach it with a chromoly gland nut washer kit.
We use an Empi 110 cam kit with helical gears and drilled lobe lifters.
An Empi iron hi volume oil pump goes on with stock relief springs and performance plunger at the pulley end.
A chrome drain plate goes on with a new screen and chrome drain plug.
New stock design connecting rods hang on the crank.
All the bearings are steel backed.
A silicone flywheel seal closes up the back.
All new crank hardware and gears
8mm case savers prepare for the 8mm head studs
Availability:
Out of stock
We accept the following forms of payment:
