Have an account? Log in!
Your shopping cart is currently empty.
Click to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlarge

1600cc long block - new build - sold

Part number:
1600budget
Description:
This started with an AE block.
We thoroughly cleaned & inspected it.
New bearings.
We had the rods rebuilt to new condition.
We installed a new 100 cam kit with drilled lobe lifters and a Schadek 30 oil pump.
We reused the Mahle (like new) 85.5mm p/cyl kit (light hone on cylinders) and installed Total Seal Gapless 2nd rings.
A pair of rebuilt stock cylinder heads (Brothers Machine) with 3 angle grind stock valves, 48cc combustion chambers, 14mm x 1/2 spark plug bores and single hi-rev springs.
A perfect set of cleaned & polished used stock pushrods ride inside new pushrod tubes & seals.
Those will push used rocker assemblies that have been taken apart, thoroughly cleaned & shafts polished & lubed before reassembly.
Stock valve adjust screws & nuts
Stock steel valve covers & bales w/ new gaskets
Stock weight flywheel with German gland nut & new large washer on the back end.
Built with 8:2 compression ratio for 87 octane gas & long life

Tax is charged for Nevada pick up or Nevada purchase

We accept the following forms of payment:

We accept American Express, Discover, MasterCard, and Visa